Well, the van is back in the shop and has been for about the past week. During this down time, Kolton put together this 3-D model of what the inside is going to look like so I thought I would share that on here:
1: This is where we are going to have the bed from east to west. It will cover that whole area from 3-2.
2,3: These pockets are going to be for storage, probably clothes, outdoor gear, things of that nature.
4: Right underneath the bed is going to be where our fridge/freezer is going to go. The bed itself is going to be able to lift up so we can access this.
5: This is our dry food/kitchen appliance storage. This will basically be floor to roof for optimal storage space.
6: Our sink! Along the wall in front of it, we are probably going to be hanging up some utensils for washing dishes and cooking.
7: This is going to be our drinking water Igloo that is gonna chill there.
8: Up under the sink, we are going to have two water tanks: one for fresh water that is going to be attached to the faucet for cooking and washing dishes, and one for gray water which is what is going to be collected after it goes down the drain.
9: In this cabinet area, we are going to be putting our trash, toiletries and cleaning supplies. The camping toilet we will have will probably be situated to the right of this space, right behind the driver seat.
10: This space underneath the counter, is going to be where our propane tank is going. This is going to be an air-tight space with a hole drilled through the bottom of the van for ventilation purposes in case it leaks for some reason.
11: Up underneath the counter right here is where we are going to be placing our solar generator as well as our camping stove/burner.
12: This is going to be our cooking counter, whenever we are cooking, we will just hook up the Coleman to the propane tank and use the remainder of the space for food prep.
That is about it for now!
Leave a Reply